Skip to content

HyperCloud Deployment

Tip

It is recommended that a new cluster is deployed with the assistance of a SoftIron Solutions Architect

HyperCloud hardware is supplied with the latest firmware image pre-installed. Deploying the cluster consists of the following steps:

  1. Physically racking the hardware
  2. Configuring the Interconnects
  3. Configuring the HyperCloud Cluster
  4. Connect the Public Network Uplinks

Warning

If you are reusing nodes from an existing HyperCloud cluster or plan to repurpose nodes from a legacy HyperDrive cluster then all the nodes must first be reset to factory state before continuing.