HyperCloud Deployment

Tip

It is recommended that a new cluster is deployed with the assistance of a SoftIron Solutions Architect

HyperCloud hardware is supplied with the latest firmware image pre-installed. Deploying the cluster consists of three steps:

1. Physically racking the hardware
2. Configuring the networking
3. Configuring HyperCloud Cluster

Warning

If you are reusing nodes from an existing HyperCloud cluster or plan to repurpose nodes from a legacy HyperDrive cluster then all the nodes must be reset to factory state before continuing.

Racking

Racking the hardware

Network Configuration

Cluster Configuration

Configure the HyperCloud cluster